| HARDWARE FEATURES |
|
| Processor |
Qualcomm Atheros 560MHz CPU, MIPS 74Kc
|
| Memory |
64MB DDR2 RAM, 8MB Flash |
| Interface |
- 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
- 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
- 1 Grounding Terminal
- 1 Reset Button
|
| Power Supply |
Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC
|
| Power Consumption |
10.8 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will
be higher by some amount depending on the length of the connecting cable.
|
| Dimensions ( W x D x H ) |
11×3.1×2.1 inch (276×79×60 mm) |
| Antenna Type |
- Built-in 12dBi 2x2 Dual-polarized Directional Antenna
- Beam Width: 60° (H-Plane) / 30° (E-Plane)
- Note: For more details, please refer to datasheet
|
| Protection |
15KV ESD Protection
6KV Lightning Protection
|
| Enclosure |
Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
|
| WIRELESS FEATURES |
|
| Wireless Standards |
IEEE 802.11b/g/n (with Pharos MAXtream disabled) |
| Proprietary Protocol |
TDMA Mode (with Pharos MAXtream enabled) |
| Wireless Speeds |
- Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz,Dynamic)
- Up to 72.2Mbps (10MHz,Dynamic)
- Up to 36.1Mbps (5MHz,Dynamic)
|
| Frequency |
2.4~2.483GHz
Note: Available operating frequency may vary depending on the limitations
of the countries or regions in which the device is used.
|
| POE ADAPTER FEATURES |
|
| Input Current |
0.8A Max @ 100VAC |
| Input Voltage |
100VA~240VAC @ 50Hz~60Hz |
| Output |
- 24VDC, 1.0A Max
- +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
|
| Output Voltage |
24VDC(+4,5pins; -7,8pins) |
| Input |
100-240VAC, 50/60Hz |
| Interfaces |
- 1 AC Jack with Earth Ground
- 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100Mbps/1000Mbps Shielded Ethernet Port (Data)
|
| Button |
Remote Reset Button |